This space-saving Kappa Multistation system is a flexible electromechanical creep testing system with three independently controlled stations in one compact load frame. The nominal load of each station is 50 kN. With this creep testing system, we address the continuing demand for space-saving creep testing solutions, mostly for existing testing labs with limited space availability. Every station of this Kappa Multistation is equipped with its own furnace and contacting high-temperature extensometer, enabling simultaneous creep tests on metal specimens up to +1,200°C in accordance with ISO 204 and ASTM E139. ► Furnace and furnace controller ◄ +1,200°C is the maximum achievable temperature on the specimen with this high-temperature furnace. There is no need for water-cooling of the furnace itself. For creep testing in an extended temperature range, exact temperature control along the specimen throughout the entire test duration is essential. The temperature controller developed by ZwickRoell and proven for many years, ensures precise, reproducible, and user-independent temperature control of the specimen for each test. The universal 3-zone furnace controller meets all requirements of the current international test standards such as DIN EN ISO 204 and ASTM E139. ► Thermocouples ◄ The temperature is controlled and measured directly on the specimen, by using calibrated thermocouples attached to the gauge length of the specimen. This ensures a precise and accurate temperature control on the specimen throughout the duration of the test. ► Extensometer ◄ Reliable strain measurement is based on an extensometer that has been optimally matched to the testing application. Therefore, selection of the right extensometer is crucial and is the basis for repeatable test results. In this case, we use a side-attaching contact-type extensometer with a gauge length of 25 mm. Each station is equipped with its own extensometer for strain measurement in accuracy class 0.5 acc. to ISO 9513. Well-designed and detachable swivel units allow for easy operation and fast test-readiness. This Multistation Creep Testing System is ideal for testing in small scale labs but also for testing surroundings where you want to get the most out of the available lab space - which just reflects the current trend: to get more for less! 00:00 - Kappa Multistation with three independently controlled stations 00:29 - Environment | Temperature measurement and control 00:54 - Test preparation 01:11 - Strain measurement and control