Changes include Rotary Spark Gap
Specs below:
-3 MOTS: 1 for ballast and current limiting, the other 2 in phase to produce overall 4kv out.
-Capacitor Bank: 5x Custom Electronics Inc. poly caps rated at 20kv DC at .1uf, only one is currently hooked up
-Primary: Almost 6 turns of .25inch soft copper tubing (20ft) (9inch ID), Tuning around 1.35 turns
-Secondary: 4.25x24in coil with approx 1200 turns of 24awg Magnet Wire
-Topload: 22inch toroid using a 14inch cake pan and 4inch Al ducting
Breakout Point scrap of Al bar stock
-Ground: 8ft hand sunk copper coated ground rod
21 Comments