In part 1 of the low-cost racing miniquad drone build video I look at the "bill of materials" needed to construct your own FPV racing mini quadcopter based on the ZMR250 frame. Materials: - the ZMR250 frame fiberglass version http://www.banggood.com/ZMR250-H250-250mm-Fiberglass-Mini-Quadcopter-Multicopter-Frame-Kit-p-933189.html or carbon version: http://www.banggood.com/H250-ZMR250-250mm-Carbon-Fiber-Mini-Quadcopter-Multicopter-Frame-Kit-p-933185.html - DYS BE1806/2300KV motors from Banggood: http://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-2-3S-for-Mini-Multicopters-p-933192.html or from HobbyKing: http://hobbyking.com/hobbyking/store/__61433__DYS_BE1806_13_Brushless_Motor_for_Multirotor_2300KV_24g.html - HobbyKing Afro 12A ESC http://hobbyking.com/hobbyking/store/__55241__Afro_ESC_12Amp_Ultra_Lite_Multi_rotor_Motor_Speed_Controller_SimonK_Firmware_Version_3.html - Gemfan 5x3 propellers from Banggood http://www.banggood.com/Gemfan-5x3-Inch-Plastic-5030-Propeller-CWCCW-For-240-250-Frame-p-937866.html or HobbyKing: http://hobbyking.com/hobbyking/store/__58252__Gemfan_5030_Multirotor_Propellers_One_Pair_CW_CCW_Green_.html - Naze32 flight controller (unsoldered) http://hobbyking.com/hobbyking/store/__55819__AfroFlight_Naze32_Acro_AbuseMark_FunFly_Controller.html or pre-soldered: http://hobbyking.com/hobbyking/store/__68813__AfroFlight_Naze32_Acro_AbuseMark_FunFly_Controller_Soldered_version_Horizontal_Pin_.html - 600TVL SuperHAD II FPV camera with WDR from Surveilzone: http://www.surveilzone.com/fpv/fpv-camera/sony-super-had-ccd-600tvl-fpv-ir-block-camera-2.8mm-lens or from SecurityCamera2000 http://www.securitycamera2000.com/products/600TVL-SONY-SUPER-HAD-CCD-D%252dWDR-Color-Board-Camera-with-OSD-Menu-DNR.html (Note: I will update this list shortly with more components and sources so don't order just yet)