𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹 𝗳𝗮𝘁𝗶𝗴𝘂𝗲 𝘂𝗻𝗱𝗲𝗿 𝗰𝘆𝗰𝗹𝗶𝗰 𝗹𝗼𝗮𝗱 || ZwickRoell presents to you one hub with everything about fatigue testing In the fatigue test, material fatigue is evoked through a cyclic load with corresponding test frequency. This may involve a pulsating load test in tension or compression as well as an alternating load test with tension and compression components. Material failure in fatigue testing often occurs well below the static strength limits. Results from fatigue tests are commonly presented in the form of stress-load cycling diagrams. Here the number of cycles to specimen break is plotted against the amplitude of the cyclic stresses. On one hand, fatigue tests are used for characteristic value determination and on the other to determine fatigue life. Subscribe to ZwickRoellTV to keep up to date with the latest trends and topics in fatigue testing. ▶ https://tiny.cc/ZwickRoellTV The following exciting and insightful topics await you in our hub: ▶ Material Fatigue ▶ Common Fatigue Tests including ➭ High Cycle Fatigue Test (S-N Test) to DIN 50100 ➭ Low cycle fatigue (LCF) test ➭ Rotating bar bending fatigue test to DIN 50113 ▶ Characteristic values which determined in material fatigue tests ▶ Testing Machines for Fatigue Tests Interested in more about us at ZwickRoell & our world of testing? Then subscribe to our channel! ▶ https://tiny.cc/ZwickRoellTV Follow #ZwickRoell via: ▶ LinkedIn: https://www.linkedin.com/company/zwic... ▶ Instagram: https://www.instagram.com/zwickroell ▶ Twitter: https://twitter.com/Zwickroellgroup For in-depth information ▶ https://www.zwickroell.com/industries...